Fin suggestions for ISONIC 150 2010

Heka · 27th March 2010, 04:21 AM

Hi,

I ordered an ISonic 150 for light wind slalom. Now I'm wondering about choosing the right fin. My weight is 110 kilos. Sails that I'm going use with the board are 11m2- 10m2 race sails and maybe the 9m2. when the wind picks up I change to isonic 133.

The suggestions for the fins are: 52-62.

Any ideas which sized fins would work the best. I-ve already have 55cm fin so the 2 fin that i'm going to get are going to be the biggest end fins. I's it possible to go with fins bigger than 62 cm to get the earliest planing ...

Remi · 27th March 2010, 05:23 AM

Hi Heka,

The Deboichet R13 58 is the recommand one for this board with the 11m², but at your weight 62 will be good enough, did you try it already?

All the best

Heka · 28th March 2010, 10:19 PM

Thanks Remi,

My board will arrive next month and then I will test it.

I think I will try Select Ultra 62cm and Select S10 57 cm. I have good experience from select-fins with is 133 2009 (they are much easier and faster to get here in Finland than the fins suggested.).

i'll get back here once i have tested the board.

ps. Greetings to "Blini"...

27th March 2010, 04:21 AM	#1
Heka New Member Join Date: Aug 2006 Posts: 10	Fin suggestions for ISONIC 150 2010 Hi, I ordered an ISonic 150 for light wind slalom. Now I'm wondering about choosing the right fin. My weight is 110 kilos. Sails that I'm going use with the board are 11m2- 10m2 race sails and maybe the 9m2. when the wind picks up I change to isonic 133. The suggestions for the fins are: 52-62. Any ideas which sized fins would work the best. I-ve already have 55cm fin so the 2 fin that i'm going to get are going to be the biggest end fins. I's it possible to go with fins bigger than 62 cm to get the earliest planing ... __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

27th March 2010, 05:23 AM	#2
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,334	Hi Heka, The Deboichet R13 58 is the recommand one for this board with the 11m², but at your weight 62 will be good enough, did you try it already? All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

28th March 2010, 10:19 PM	#3
Heka New Member Join Date: Aug 2006 Posts: 10	Thanks Remi, My board will arrive next month and then I will test it. I think I will try Select Ultra 62cm and Select S10 57 cm. I have good experience from select-fins with is 133 2009 (they are much easier and faster to get here in Finland than the fins suggested.). i'll get back here once i have tested the board. ps. Greetings to "Blini"... __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Départ au planning entre isonic 94 2010 et 101 2010	titouan	French Forum	1	31st October 2009 12:15 PM
FIN FOR ISONIC 111 2009&87lt 2007-SUGGESTIONS	IOANNHS	Ask Our Team	2	21st May 2009 09:03 PM
Suggestions?	Jeff R	Do it standing up! The Stand Up Paddling Forum	6	14th December 2008 01:31 PM
Just starting out - board suggestions	TxAgs	Women's Zone	0	8th June 2007 08:43 AM