isonic127 sail NP and fins - Page 2

emil · 7th May 2011, 11:42 AM

After a long waiting I finally got my new boards. I'm writing again for the fin size for the isonic 127 and the RSR NP 9.5 sail. As recommended here in the forum I ordered and got a R16 50cm Deboichet but with a big surprire I found printed on the board that the recommended fin for a 9.6 sail is the 52cm and NOT the 50.
A fin cost more than 300$ and above all can takes months to have it.
So where is the mistake?
Thanks

Remi · 8th May 2011, 03:42 AM

Hi Emil

If you want to get the best performances for down wind slalom, the 50 is the best size, the 52 to get better performance on Up Wind.

Hope this help

All the best

8th May 2011, 03:42 AM	#12
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,338	Hi Emil If you want to get the best performances for down wind slalom, the 50 is the best size, the 52 to get better performance on Up Wind. Hope this help All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iSonic 111 and Canefire fins from Vector Fins	nonopr	Ask Our Team	7	20th September 2011 10:25 PM
volume/knots/sail ... or width/knots/sail	iago	Free Forum	5	10th May 2009 01:36 PM
Looking for a 5.5-6.0 Freestyle sail that gets planning me like in 6.5 to 7.0 sail	Unregistered	Free Forum	11	10th June 2008 12:06 PM
Stock fins and Sail range.	WSguy	Ask Our Team	0	11th July 2007 07:43 PM

7th May 2011, 11:42 AM	#11
emil Member Join Date: Jul 2007 Posts: 44	After a long waiting I finally got my new boards. I'm writing again for the fin size for the isonic 127 and the RSR NP 9.5 sail. As recommended here in the forum I ordered and got a R16 50cm Deboichet but with a big surprire I found printed on the board that the recommended fin for a 9.6 sail is the 52cm and NOT the 50. A fin cost more than 300$ and above all can takes months to have it. So where is the mistake? Thanks