Replacement foot pads for Kode 2009

13th February 2012, 02:45 PM

Hi,

I have a second-hand Kode 2009, 94l, the black and white foot pads were all peeling away when I got it, other than that it is ace.

Do you supply replacement pads and if so how can I get hold of them please?

(I tried to put this under Ask the Team but it wouldn't let me register so I had to post here).

Many thanks
Rachael

13th February 2012, 02:55 PM

Oh don't worry I found another post the same saying to go via a Starboard dealer so I will.

It seems to be a recurring theme on this forum, shame because the boards are otherwise very good.

Rachael

Jean-Marc · 13th February 2012, 08:31 PM

Rachael,

A good quality neoprene glue will fix the foot pads back on deck. Make sure they are clean (no sand, no salt) and dry before glueing them again.

Cheers !

JM

14th February 2012, 09:58 AM

Hi, yes the problem is that the pads aren't intact, they are all torn where parts have peeled away and come off so I need replacements. Will see what the shop can come up with.

Thanks
Rachael

Ericred0 · 14th February 2012, 05:36 PM

Iv got the same problem, the only place i could find material to make replacement pads is in american website North Shore lots of choice for pattern colour ect 4sq foot cost £20 plus delivery plus customs import charge. Not cheap.
Think Starboard could support their customers better......
Eric

15th February 2012, 05:06 PM

Thanks for the tip Eric.
The Starboard importer couldn't help so I will check that website and another place someone has recommended.
Yes it is crazy that something so expensive should fall apart so quickly and parts not be available, going by how many people have posted on here with the same problem it seems there should be quite a business in providing spare parts!

Rachael

Jean-Marc · 16th February 2012, 09:42 PM

Rachael,

I think Eric was talking about that product:

http://www.northshoreinc.com/store/p...?idCategory=26

You can find fish-scale foot pad sheets at a local ship shop. Or ask for TBS non-slip deck covering mats or sheets :

http://www.proboat.co.uk/category.asp?dep=1&cat_id=39
http://www.compass24.ch/web/catalog/...ation/4908953#

Alternative product designed for dinghies or yacht:

http://www.passage-securite.com/en/n...peed-grip.html

Cheers !

JM

Ericred0 · 22nd February 2012, 07:52 PM

Hi again, ive just put new pads on my isonic with the north shore stuff. looks brill.... recomend it.

Remi · 23rd February 2012, 05:00 AM

Hi All,

The Pads are available to all distributors, so they should have them in stock, I will make a note on to all them to make sure they order pads part.

From where are you?

All the best

19th March 2012, 10:36 AM

Hi Remi,

I have the same problem as Rachael, but with my iSonic 111 from 2007, the pads are letting loose and need replacement. This morning I mailed the Dutch distributer (www.fox-sports.nl), and they told me it's not possible to order pads.

Did you also mail the Dutch distributor? If not so, is it possible to do so? I would also like to have my iSonic in the best shape possible

Thanks!

Martijn (Netherlands)
martijn.cordes@gmail.com

13th February 2012, 02:45 PM	#1
Unregistered Guest Posts: n/a	Replacement foot pads for Kode 2009 Hi, I have a second-hand Kode 2009, 94l, the black and white foot pads were all peeling away when I got it, other than that it is ace. Do you supply replacement pads and if so how can I get hold of them please? (I tried to put this under Ask the Team but it wouldn't let me register so I had to post here). Many thanks Rachael

15th February 2012, 05:06 PM	#6
Unregistered Guest Posts: n/a	keepop particularly Thanks for the tip Eric. The Starboard importer couldn't help so I will check that website and another place someone has recommended. Yes it is crazy that something so expensive should fall apart so quickly and parts not be available, going by how many people have posted on here with the same problem it seems there should be quite a business in providing spare parts! Rachael

23rd February 2012, 05:00 AM	#9
Remi STARBOARD DEVELOPMENT Join Date: Aug 2006 Location: Thailand Posts: 2,334	Hi All, The Pads are available to all distributors, so they should have them in stock, I will make a note on to all them to make sure they order pads part. From where are you? All the best __________________ Rémi Can answer if you have any questions on this following boards : Carve 111, 121, 131, 141, 151 & 161 Futura 93, 101, 111, 121, 131 & 141. iSonic 80, 87, 90, 97, 107, 110, 117, 127 & 137 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. UltraSonic 147 Formula Experience One Design Phantom Race 377/320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Phantom 295 : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Formula 167 & 167 Wide : To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Racing Serinity Cat Concept To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kode 112 foot pad peeling off	Curtworld	Ask Our Team	5	9th August 2012 10:26 PM
Pads on 2009 iSonic	Hooksey	Ask Our Team	0	12th July 2011 09:12 AM
replacement for Kode 102l	dofi22	Ask Our Team	0	21st June 2011 03:32 AM
Kode pads	Z a c	Ask Our Team	3	26th October 2010 01:25 PM
unsticky foot pads on my s-type	surfcanarias	Ask Our Team	1	14th June 2007 02:23 AM

13th February 2012, 02:55 PM	#2
Unregistered Guest Posts: n/a	Oh don't worry I found another post the same saying to go via a Starboard dealer so I will. It seems to be a recurring theme on this forum, shame because the boards are otherwise very good. Rachael

13th February 2012, 08:31 PM	#3
Jean-Marc TEAM Join Date: Aug 2006 Posts: 1,241	Rachael, A good quality neoprene glue will fix the foot pads back on deck. Make sure they are clean (no sand, no salt) and dry before glueing them again. Cheers ! JM

14th February 2012, 09:58 AM	#4
Unregistered Guest Posts: n/a	Hi, yes the problem is that the pads aren't intact, they are all torn where parts have peeled away and come off so I need replacements. Will see what the shop can come up with. Thanks Rachael

14th February 2012, 05:36 PM	#5
Ericred0 New Member Join Date: Jan 2012 Location: Llangorse in the brecon beacons. very close to the lake. Posts: 16	Iv got the same problem, the only place i could find material to make replacement pads is in american website North Shore lots of choice for pattern colour ect 4sq foot cost £20 plus delivery plus customs import charge. Not cheap. Think Starboard could support their customers better...... Eric

16th February 2012, 09:42 PM	#7
Jean-Marc TEAM Join Date: Aug 2006 Posts: 1,241	Rachael, I think Eric was talking about that product: http://www.northshoreinc.com/store/p...?idCategory=26 You can find fish-scale foot pad sheets at a local ship shop. Or ask for TBS non-slip deck covering mats or sheets : http://www.proboat.co.uk/category.asp?dep=1&cat_id=39 http://www.compass24.ch/web/catalog/...ation/4908953# Alternative product designed for dinghies or yacht: http://www.passage-securite.com/en/n...peed-grip.html Cheers ! JM

22nd February 2012, 07:52 PM	#8
Ericred0 New Member Join Date: Jan 2012 Location: Llangorse in the brecon beacons. very close to the lake. Posts: 16	Hi again, ive just put new pads on my isonic with the north shore stuff. looks brill.... recomend it.

19th March 2012, 10:36 AM	#10
Martijn Guest Posts: n/a	Hi Remi, I have the same problem as Rachael, but with my iSonic 111 from 2007, the pads are letting loose and need replacement. This morning I mailed the Dutch distributer (www.fox-sports.nl), and they told me it's not possible to order pads. Did you also mail the Dutch distributor? If not so, is it possible to do so? I would also like to have my iSonic in the best shape possible Thanks! Martijn (Netherlands) martijn.cordes@gmail.com