Inflating your Starboard inflatable paddle board is really easy and should take only take a few minutes to get it fully inflated and paddling. If you’re still a beginner paddle boarder, then this video with show you step-by-step how to correctly inflate your iSUP.

To Inflate Your Inflatable Starboard SUP:

1. Set up your inflatable paddle board in an area with no sharp rocks or object
2. Unroll your inflatable Starboard SUP with the fins down
3. Grab your tiki pump, and attached the house to the ‘out’ valve attachment
4. Turn pump onto double action
5. Locate the valve on the tail end of your board
6. Ensure the yellow pin is in the up position
7. Insert the end of the hose
8. Secure with a clockwise half-turn
9. Now you are ready to start pumping
10. Use the full range of the pump, ensure bending of the knees
11. Switch the pump to single-action once most of the board has been pumped up
12. Now the pump only inflates on the downstroke
13. Once the needle gets to the green then you have enough pressure
14. Aim for 15-18 PSI
15. Remove the house with a counter-clockwise turn
16. Reattached the valve cap making sure it’s tight and secure
17. Now you are ready to get out and have fun!